But you can’t TIG weld body panels if you can’t get to both sides of them! At least that is what some metal shapers will say, and in their defense there are reasons for making that statement. To understand why, you have to understand that generically speaking, the hardness of the welds are different between MIG and TIG welds, and that matters. A MIG weld will typically have a harder weld than a TIG weld on the same material. Because of this, the MIG weld is more difficult to planish or hammer flat when shaping welded panels. It is for this reason that lots of folks say you can’t MIG weld body panels on customs and such. But the truth is that it kind of depends on what you are doing and where you are doing them on the body. Some shapers also say you shouldn’t TIG weld a panel unless you planish the weld afterwards, which means that if you can’t get to the both sides of a panel you can’t planish it and therefore can’t finish the weld properly. But that’s not necessarily true. Watch and find out why.
In this video, Karl from Make it Kustom is going to weld in the newly finished A pillar for his Zephyr chop project and he’s going to do it with his TIG welder and show you why that is the right choice in this case. I approve.
We like how-to stuff around here and one of our favorites when it comes to shaping metal is Karl Fisher at the Make It Kustom channel. This kid is talented, easy to understand, and not afraid to share the lessons he’s learned the hard way. In fact, if something doesn’t go the way he expects, he shares that and shows the fix so that you don’t have the same problem when you go to tackle your project. And he works on his own projects, as well as friend’s stuff, but no project means more to him than his 1939 Lincoln Zephyr project. This one is awesome, not only because it is a Zephyr, but also because it started life as a 4-door and he’s making it into the chopped coupe that he always dreamed of owning.
It’s going to be awesome, he’s taking us through the entire build, and you will learn a lot if you just watch the video series. Here’s the 5th installment of the Zephyr chop, and it is all about making new door frames that fit the chop, the windshield, and the taper of the new look.
CLICK HERE TO SEE THE FULL SERIES ON CHOPPING THIS LINCOLN ZEPHYR
Video Description:
On this episode of Make It Kustom, I line up all the inner door frame areas on the driver side of the Zephyr and TIG weld the pillar cap on the passenger side.
The post Zephyr Chop Part 7: How To TIG WELD Sheet Metal – LESS WARPING When There Is No Access appeared first on BangShift.com.
Commercials Cooperation Advertisements:
(1) IT Teacher IT Freelance
立刻註冊及報名電腦補習課程吧!
电子计算机 -教育 -IT 電腦班” ( IT電腦補習 ) 提供一個方便的电子计算机 教育平台, 為大家配對信息技术, 電腦 老師, IT freelance 和 programming expert. 讓大家方便地就能找到合適的電腦補習, 電腦班, 家教, 私人老師.
We are a education and information platform which you can find a IT private tutorial teacher or freelance.
Also we provide different information about information technology, Computer, programming, mobile, Android, apple, game, movie, anime, animation…
(2) ITSec
www.ITSeceu.uk
Secure Your Computers from Cyber Threats and mitigate risks with professional services to defend Hackers.
ITSec provide IT Security and Compliance Services, including IT Compliance Services, Risk Assessment, IT Audit, Security Assessment and Audit, ISO 27001 Consulting and Certification, GDPR Compliance Services, Privacy Impact Assessment (PIA), Penetration test, Ethical Hacking, Vulnerabilities scan, IT Consulting, Data Privacy Consulting, Data Protection Services, Information Security Consulting, Cyber Security Consulting, Network Security Audit, Security Awareness Training.
Contact us right away.
Email (Prefer using email to contact us):
SalesExecutive@ITSec.vip