Mooneyes New Year’s Party At Irwindale Continues! More Customs, Hot Rods, Traditionals, Lowriders, Vans, And Drag Cars!
Here’s another great gallery of photos from the Mooneyes New Year’s Party from Grippo! And if you missed the previous photos, we’ve got a link for that down below too! (Words and Photos by Joe Grippo) Most people take their yearly vacations in the summertime, not us. My nice weather months (Spring, Summer, and Fall) […]
The post Mooneyes New Year’s Party At Irwindale Continues! More Customs, Hot Rods, Traditionals, Lowriders, Vans, And Drag Cars! appeared first on BangShift.com.
DD Speed Shop’s FORGOTTEN First Generation Camaro: Nothin But NEW METAL! – This Makes It A Rust Free 1967 Camaro Right?
When you get a Camaro project, you care a bit less about the rust when it comes with a bunch of new replacement panels. After all, when you’ve got all those parts sitting in the garage you are all done but the doing it right? It’s 2/3 built when the parts are all there. Or […]
The post DD Speed Shop’s FORGOTTEN First Generation Camaro: Nothin But NEW METAL! – This Makes It A Rust Free 1967 Camaro Right? appeared first on BangShift.com.
How To: Installing a McLeod RXT Street Twin Clutch on RebelDryver’s BluePrint Engines 400 Small Block!
It is incredibly rare to find anyone that daily drives a stick shift car anymore. It’s also rare to find folks that drive classic cars daily. Both in one is almost unheard of, but Scott Liggett is one of those guys that has daily driven a stick shift classic car for most of the past […]
The post How To: Installing a McLeod RXT Street Twin Clutch on RebelDryver’s BluePrint Engines 400 Small Block! appeared first on BangShift.com.
Murder Nova Burnout Truck – Build Series Part 1: Tearing Down This ’81 C10 and Seeing What’s Hiding And Making Game Plan
It sure ain’t pretty! But that’s okay, because Shawn and the gang are going to blow this thing all apart to make it a little bit prettier before turning their attention to making this the baddest tire smoking machine on the planet. It’s time to build a burnout truck and that’s just what they are […]
The post Murder Nova Burnout Truck – Build Series Part 1: Tearing Down This ’81 C10 and Seeing What’s Hiding And Making Game Plan appeared first on BangShift.com.
Chassis Mods Part 1: Bagging a 1936 Ford, Rebuilding Frame Rails, Custom Crossmembers, Notch, And A One Off LS Swap.
The Bellos Kustoms crew are jamming on another project and this time it’s a little different. They’re taking what looks like a pretty clean 1936 Ford Chassis and building an LS swapped, air ride equipped, low down hot rod out of it. That means prepping the chassis, measuring, cutting, and more and that’s before any […]
The post Chassis Mods Part 1: Bagging a 1936 Ford, Rebuilding Frame Rails, Custom Crossmembers, Notch, And A One Off LS Swap. appeared first on BangShift.com.
Cool Tool Spotlight: You Need This! A Wheel Lug Pattern Caliper Slide Ruler. No More Red Plastic Rings!
Every hot rodder either has one of those red plastic rings that has multiple wheel lug patterns in it, or wishes they did. I’ve got several, as I’ve bought them at the swap meet for a few dollars on different occasions. When I’m smart, I carry one in my pocket while roaming the swap meet […]
The post Cool Tool Spotlight: You Need This! A Wheel Lug Pattern Caliper Slide Ruler. No More Red Plastic Rings! appeared first on BangShift.com.
You’ve Been Lied To! The Truth About Welding Sheetmetal Panels! Change Your Ways To Get Straight, Smooth Panels Easier.
Low heat and small tacks. This is what so many of us have been told for decades about welding sheet metal panels to avoid distortion. But the truth is that in the past year or so I’ve seen tons of videos from sheet metal shapers who talk much more about the heat affected zone of […]
The post You’ve Been Lied To! The Truth About Welding Sheetmetal Panels! Change Your Ways To Get Straight, Smooth Panels Easier. appeared first on BangShift.com.
The Engine Builder Hall of Fame Class of 2024 – The Pioneer of Performance Parts: Ed Winfield
The Engine Builder Hall of Fame is meant to recognize and memorialize the individuals that played a significant role in the development of internal combustion engines for competition. From the origins of hot rodding, to all forms of motorized competition, the Engine Builder Hall of Fame enshrines those who innovated, achieved, and advanced the internal […]
The post The Engine Builder Hall of Fame Class of 2024 – The Pioneer of Performance Parts: Ed Winfield appeared first on BangShift.com.
Steve Magnante Is Back And Truck Week Continues. Truck Week Feature #13 Heavy Duty “Corn Binders” International Harvester Trucks!
Here’s the thirteenth video of Steve’s Truck series! This time it’s all about the venerable “Corn Binders”, which is just one of the nicknames given to International Harvester trucks and tractors. These two show the different evolution that went on with these big beasts. Watch and if you missed the previous videos use the link […]
The post Steve Magnante Is Back And Truck Week Continues. Truck Week Feature #13 Heavy Duty “Corn Binders” International Harvester Trucks! appeared first on BangShift.com.
Mooneyes New Year’s Party At Irwindale: Customs, Hot Rods, Traditionals, Lowriders, Vans, And More!
(Words and Photos by Joe Grippo) Most people take their yearly vacations in the summertime, not us. My nice weather months (Spring, Summer, and Fall) are for racing and hitting up our many local events. We like to escape the harsh northeast winters to warmer locales, mainly to get in some car related activities in […]
The post Mooneyes New Year’s Party At Irwindale: Customs, Hot Rods, Traditionals, Lowriders, Vans, And More! appeared first on BangShift.com.